|
Information Page Links:
Featured Steel Shelving Manufacturers
About Steel Shelving
Steel Shelving Terms
Steel Shelving Associations
Steel Shelving Resources
Trade Shows
Featured Steel Shelving Articles
More Articles
|
|
About Steel Shelving
Steel shelving aids in the systematization of groups
of items. Steel shelving utilizes any number of various types of steel
materials. Steel is a rigid compound that is highly durable, and its
durability makes it an excellent choice for large, heavy loads. Steel
shelving can be assembled in most locations, providing great flexibility.
There are several types of steel shelving units, each with its own advantages.
If space is a limiting factor and easy access to every stored article
is not a necessity, a closed type shelving system would be appropriate.
However, if there is a sufficient amount of space at hand and easy access
to every item on the shelves is necessary, consider an open type shelving
unit. A steel shelving unit with a box-beam shelf design would be appropriate
for office supplies, as double-sided compression clips allow up to 350
pounds per shelf. Heavy-duty steel shelving can hold up to 1,000 pounds
and is ideal for stock rooms, factories or office. If standard steel
shelving components are too big, small or awkwardly shaped, a custom-fitted
shelving system may be necessary.
When selecting a steel shelving unit, several factors should be considered.
Steel shelving units should comply with federal, state, local, fire and
building codes. Layout is also an important consideration. The width,
depth, height, weight and clearance needed for the handling of the product
to be stored will determine the width and depth of the shelves. Adequate
working aisle space must be left between shelving units. The shelves
themselves should be selected based on the load that each shelf is expected
to carry, including the size and height of the load. If products are
to be stacked, note that the space between shelves will be increased,
which may result in the reduction of post capacity.
Correct installation of steel shelving units depends on several factors.
Typically, steel shelving is braced using bars, straps or angles placed
in an "X" arrangement. Rectangular plates, gussets and corner
braces are also used. Steel shelving can be connected in many different
ways, the most common of which are mechanical fastenings (e.g. nuts and
bolts), compression clips and ledge type clips. Steel shelving should
be installed with plumbness and levelness in every direction. It is recommended
that steel shelving be anchored to prevent overturning or shifting and
to provide a more rigid structure. Steel shelving foot plates are commonly
used to anchor shelving units. These steel shelving foot plates are attached
to a vertical post and then to the floor with one of a variety of floor
anchors.
Featured
Articles
http://www.buyerzone.com/features/savvy_shopper/ss071502.html
Types of Steel Shelving
-
is shelving that is covered on both the back and sides using panels.
When combined with a door, a closed shelving unit can make a lockable
cabinet, providing a clean, professional look.
-
is made for bulky and weighty loads that surpass maximum load capacities
of normal shelving.
- consists of a framework of heavy-duty supports and shelves used to hold and display goods.
-
has many advantages, including the following: no need for nuts or bolts,
quick and easy to assemble, adjustable shelves, unobstructed spans,
free standing shelf units and access from all sides.
- is a storage unit that has wheels on the bottom so that it can be easily transported from one location to another.
-
is more easily accessible than closed shelving. With the use of back
and side braces, lateral sway can be minimized greatly.
- optimizes space by stacking goods horizontally and vertically.
-
makes use of stainless
steel materials, rather than other variants of the steel family,
which are prone to corrosion.
-
is comprised of sets of horizontally placed surfaces that are parallel
to the ground.
|
|
